Breakout Training

1. Set up lane/sidewalk closure as required, leaving enough room for the truck/trailer
2. Ensure all cuts have been completed, including double cuts where required
3. With smaller pieces, the double-cut may have to be broken with a sledgehammer and removed by hand
4. Use the breaker to break all materials into a manageable size
5. Remove all concrete/asphalt/gravel, dirt, and loam cleanly, paying attention not to mix materials
6. Cut to appropriate grade maintaining an additional 300mm on all sides to accommodate formwork
7. Use barricades and construction/caution tape to secure the area when complete